CAMLOG® PROSTHETICS
The complete prosthetic portfolio for a diversity of indications
Single-tooth restoration – cement-retained
Patients and their requirements are the focus. CAMLOG® Abutments meet these challenges and enable fabrication of functional, esthetic restorations of the highest quality.
Temporary Abutments PEEK
A cementable temporary single crown restoration can be performed with the temporary abutment made of PEEK (poly ether ether ketone). The optional Temporary Abutment PS can be used for Platform Switching for forming the soft tissue. The Tube-in-Tube® Implant-abutment connection acts as antirotational mechanism.
Esthomic® Abutments
The CAMLOG® Esthomic® Abutments are well suited for cement-retained crowns and bridges in esthetically demanding regions. Due to the anatomically appropriate shoulder geometry and the two selectable gingival heights, individual modifications are reduced in the shoulder area and the processing time shortened. Esthomic® Abutments are available in straight, 15° and 20° angled versions and in the platform switching option. Where space is limited, the Esthomic® Abutment inset with the same circular diameter as the implant can be used.
Universal abutment
The CAMLOG® Universal abutment can be used for cementable crown, bridge and double crown restorations. The abutment is made from a titanium alloy and can be custom-trimmed. Divergences of the implant axes can be compensated for by a suitably adapted forming.
The Universal Abutment PS makes the optional platform switching possible.
Logfit® Abutment line
The CAMLOG® Logfit® Abutment line consists of prefabricated components precisely matched to one another thus standardizing the clinical and technical procedures. The result is a lower workload for the practice and dental laboratory when fabricating cement-retained crown and bridge restorations.
Titanium base CAD/CAM
CAMLOG® Titanium bases CAD/CAM of the crown version act as bonding base for customized single crowns and mesostructures made from suitable materials. Optical recording of the base is performed with the aid of suitable dental scanners with mounted scan abutments from third party suppliers. The digitally captured geometry is used for modeling and fabricating single crowns and mesostructures using CAD/CAM technology. The titanium bases CAD/CAM of the crown version are equipped with the Tube-in-Tube® Implant-abutment connection as antirotational mechanism.