CAMLOG® IMPLANT SYSTEM

Customized CAD/CAM implant prosthetics

Digital Technology

CAMLOG offers well matched products for digital technology for its implant systems:

CAMLOG® Titanium bases CAD/CAM

Titanium base CAD/CAM

CAMLOG® Titanium bases CAD/CAM of the crown version are acting as a bonding base for customized single crowns and mesostructures made from suitable materials. Optical recording of the base is performed with the aid of suitable dental scanners with mounted scan abutments from third party suppliers. The digitally captured geometry is used for modeling and fabricating single crowns and mesostructures using CAD/CAM technology. The titanium bases CAD/CAM of the crown version are equipped with the Tube-in-Tube® Implant-abutment connection as antirotational mechanism.

CAD LIBRARIES

CAD libraries with the geometries of the titanium bases CAD/CAM and a suggestion on milling geometry simplify the work process and enable precise results. Libraries are available for the following CAD software including instructions on import:

Geometries of the titanium base CAD/CAM for crowns already integrated by the manufacturer.
System-specific scanbody required.
Available from your Sirona dealer.

Implant analog

Alternatively, the working model can be fabricated with color-coded CAMLOG® Implant analogs for printed or cast models. To integrate the implant analog into a printed model, the analog is screw-retained with a corresponding handle for the CAMLOG®/CONELOG® Implant analog and pressed into the cast model.

Scanning cap for bar abutments

Scanning cap for bar abutments

The scanning cap for bar abutments is used to visually record in 3 dimensions the prosthetic platform (including alignment of the hex surface) of CAMLOG® or CONELOG® Bar abutments in the mouth or of bar lab analogs on the working model. The scanning caps are made of PEEK (poly ether ether ketone) and are protected against rotation. The scanning caps are supplied sterile, allowing their immediate intraoral use.

CAD LIBRARIES

CAD libraries with the geometries of the scanning caps for bar abutments simplify the work process and enable precise results. Libraries are available for the following CAD software including instructions for import:

CAMLOG Biotechnologies GmbH may market products only upon approval by the competent authorities. Not all products are available in all countries.

Browse Catalog